post

Blown Bitumen 115/15

About Blown Bitumen 115/15:

By passing air through Bitumen penetration 60/70, Oxidized bitumen grades like Blown Bitumen 115/15 are produced. This process gives bitumen more rubbery properties. Also they are harder bitumen. Hard bitumen under controlled temperature conditions. We widely use that as an anti-slip layer compound in piling industry, for manufacture of roofing felts, roofing and waterproofing industries, sound dampening felts and under carriage sealant in automotive industry, electric cable joint protection, joint filling compound, sealant compound and more. Also we use in sealing saw cuts and joints.

In addition we use that in manufacturing of bituminous marine mastic for oil & gas pipeline joints.
Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. It`s highly flexible and durable. Furthermore, it`s chemically very stable.
Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various uses.

Blown Bitumen 115/15 Test Data Sheet:

Oxidized Bitumen 115-15 TDS

Oxidized bitumen 115/15

Oxidized Bitumen 85/30

Oxidized Bitumen 85/30

Oxidized Bitumen 85/30

DESCRIPTION
Oxidized Bitumen 85/30 IS BASED ON PETROLEUM BITUMEN WHICH IS MADE BY BLOWNING BITUMEN 60/70 BY VERY HOT AIR.

RECOMMEND USES
IT IS USING AS RAW MATERIAL FOR BITUMEN COAT, ROOFING, INSULATION AND ISOLATION BITUMEN MEMBRANE SHEET.

SURFACE PREPARATION
SURFACES MUST BE DRY, CLEAN AND FREE OF LOOSE PARTICLES, FORMWORK, CURING PRODUCTS, IRREGULARITIES, SLURRY, ETC.

APPLICATION
THE OXIDIZED BITUMEN SHOULD BE HEATED DOUBLE TEMPRATURE AGAINST THE SOFTENING POINT TO BE ABLE TO HAVE FLOW AND VISCOSITY.

STORAGE/HANDLING
10 YEARS WITH MULTI TIME HEATING AND COLDING, PLEASE REFERE TO MSDS.

PACKING
AVAILABLE IN 25KG MELTABLE AND CRAFT BAG, DRUM PACKING.

Analyze of Oxidized Bitumen 85/30

TEST SPECIFICATION

STANDARD RANGE

TEST METHOD

Specific gravity @25/25 C

1.05 approx.

D-70

Penetration @25C

25/35

D-5

Softening point C

70/80

D-36

Ductility@25C

1.5min

D-113

Loss on heating (wt)%

0.2max

D-6

Flash point C

260min

D-92

Solubility in CS2 (wt)%

99min

D-4

Specific gravity @25/25 C

1.05 approx.

D-70

post

Oxidized Bitumen 115-15

Oxidized Bitumen 115 15:

Oxidized Bitumen 115 15 uses in roofing manufacturing plants to produce shingles, roll goods, built-up roofing felts, and under layment felts. In addition it used to produce “mopping-grade” roofing asphalts. Who shipped as a solid and heated in a kettle at work site.

Blowning Bitumen:

Oxidized Bitumen grades are produced by passing air through soft bitumen under controlled temperature conditions. This process gives the bitumen more rubbery properties than penetration or hard grade bitumen, and enables the product to serve a variety of uses in industrial applications. These grades are suitable for sealing saw cuts and joints where there صث expect to be the minimum amount of moving in the joint. Their wide temperature range prevents bleeding in high temperature applications. Also can use for industrial applications such as pipe coating, roofing, waterproofing, flooring, mastic, sound damping, carpet backing, adhesive and electrical applications.

Oxidized Bitumen 115 15

Hard bitumen under temperature that we controlled conditions widely can use as an anti-slip layer compound in the piling industry, for manufacture of roofing felts, the roofing and waterproofing industries, for sound dampening felts and under carriage sealant in the automotive industry, electric cable joint protection, joint filling compound, sealant compound and many others. Also can use in sealing saw cuts and joints where expected movements are minimum.

Oxidized Bitumen 115 15 is  petroleum bitumen. We made by blowing bitumen 60/70 by hot air. 115/15 is most popular grade (70% of our capacity).

Uses Oxidized Bitumen 115 15:

Some of the major advantages of Oxidized Bitumen are that it is completely water resistant, highly flexible and durable. Further, it is chemically very stable. Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various applications.

Oxidized Bitumen 115/15 is using as raw material for bitumen coat, roofing, insulation and isolation bitumen membrane sheet.The special usage of bitumen oxide 115/15 is bitumen paint manufacturing and oil well drill fluid.Oxidized Bitumen 115 15

Surface preparation to use Blown Asphalt 115/15:

Before using, surfaces must be dry, since high temperature of oxidized bitumen will vapor wet and bitumen will spattering allover. Also it should be clean, free of loose, form-work, curing products, irregularities and slurry.

Application of blown bitumen 115/15:

Blown bitumen should heated double temperature against softening point to be able flow and viscose. It normally heating up to 230. Furthermore, Bitumen in bag needs approx +50C extra temperature to melt bags.

It has 10 years validity with multi time heating and colding, please refer to MSDS. The common packing of oxidized bitumen is 25kg meltable bag and 25kg craft bag.

Packing of bitume oxide 115/15:

Bitume oxide available in 25kg melt-able, craft bag, drum also as bulk.