Oxidized Bitumen 115/15:
Oxidized Bitumen 115/15 uses in roofing manufacturing plants to produce shingles, roll goods, built-up roofing felts, and under layment felts. In addition it used to produce “mopping-grade” roofing asphalts. Who shipped as a solid and heated in a kettle at work site.
Oxidized Bitumen grades are produced by passing air through soft bitumen under controlled temperature conditions. This process gives the bitumen more rubbery properties than penetration or hard grade bitumen, and enables the product to serve a variety of uses in industrial applications. These grades are suitable for sealing saw cuts and joints where there is expected to be the minimum amount of moving in the joint. Their wide temperature range prevents bleeding in high temperature applications. They can also be used for industrial applications such as pipe coating, roofing, waterproofing, flooring, mastic, sound damping, carpet backing, adhesive and electrical applications.
Hard bitumen under controlled temperature conditions is widely used as an anti-slip layer compound in the piling industry, for manufacture of roofing felts, the roofing and waterproofing industries, for sound dampening felts and under carriage sealant in the automotive industry, electric cable joint protection, joint filling compound, sealant compound and many others. Also used in sealing saw cuts and joints where expected movements are minimum.
Oxidized Bitumen 115/15 is petroleum bitumen. It made by blowing bitumen 60/70 by hot air. 115/15 is most popular grade (70% of our capacity).
Uses Oxidized Bitumen 115/15:
Some of the major advantages of Oxidized Bitumen are that it is completely water resistant, highly flexible and durable. Further, it is chemically very stable. Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various applications.
Oxidized Bitumen 115/15 is using as raw material for bitumen coat, roofing, insulation and isolation bitumen membrane sheet.The special usage of bitumen oxide 115/15 is bitumen paint manufacturing and oil well drill fluid.
Surface preparation to use Blown Asphalt 115/15:
Before using, surfaces must be dry, since high temperature of oxidized bitumen will vapor wet and bitumen will spattering allover. Also it should be clean, free of loose, form-work, curing products, irregularities and slurry.
Application of blown bitumen 115/15:
Blown bitumen 115/15 should heated double temperature against softening point to be able flow and viscose.It normally heating up to 230. Furthermore, Bitumen in bag needs approx +50C extra temperature to melt bags.
It has 10 years validity with multi time heating and colding, please refer to MSDS. The common packing of oxidized bitumen is 25kg meltable bag and 25kg craft bag.
Packing of bitume oxide 115/15:
Bitume oxide available in 25kg melt-able, craft bag, drum also as bulk.