Cutback Bitumen MC-250

Cutback Bitumen MC-250

Cutback Bitumen MC-250 is medium curing (MC) cut-back asphalt consisting of penetration grade asphalt cement and diluent or cutter of medium volatility.

The diluent temporarily reduces the viscosity of the asphalt cement for ease of handling and application. After application the diluent evaporates, leaving asphalt cement to perform its function. Petrochemical Trade Cutback MC-250 conforms to the specifications of ASTM D2127 (Medium-Curing Asphalt) or AASHTO M82a) Roofing. As a waterproofing membrane and as an adhesive to stick chippings onto a flat. horizontal roof to minimize the effects of weathering from the sun. b) Damp-Proof Courses – Use as damp-proof membranes in concrete floors particularly for small repairs or where extensions key-in to existing structures.

 

Uses of Cutback Bitumen MC250

Cutback bitumen MC250 consist of initial incorporation of asphalt into the surface of non-asphalt based course preparatory to any superimposed treatment of construction.

In addition cutback asphalt MC-250 applying to waterproofing of surfaces, plug capillary voids, coat and bond loose mineral particles.

Also cutback agents use to lower the viscosity of bitumen when it is applied as a primer to the surface of a road pavement aggregate base course or substrate.

Furthermore we use Kerosene as a bitumen cutback agent at different concentrations according to local conditions and requirements.

Cutback bitumen is ideal for prime coat and cold apply because of easy uses. Also it no needs to thinning and heating.

 

Packing of cutback Bitumen MC-250

Packing of cutback bitumen MC-250 is in new thick steel drum. This drums are on pallet to prevent any leak inside of container. Also bulk in bitutainer and tanker is possible.