Bitumen Penetration Grade 40/50

General Description of Bitumen Penetration Grade 40/50

PUBLTD Bitumen Penetration Grade 40/50 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. Also This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Softening Point and Penetration of Bitumen 40/50

Penetration grade bitumen supplied by PUBLTD is pure petroleum grade bitumen, manufacture from vacuum bottom by passing hot air. Also The bitumen supply by PUBLTD produce from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 30/40 has penetration between 40~50 desi-millimeter and softening point between 52 ~ 60C.However, The penetration grade bitumen 30/40 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 30/40 has very strong viscosity compare to other grades.

Guaranty|warranty of Bitumen Penetration Grade 40/50

PUBLTD guaranty the quality of Bitumen Penetration Grade 40/50 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. PUBLTD guaranty the quality to meet with ASTM/EN 12591.

Specification of Bitumen Penetration Grade 40/50