Bitumen Penetration Grade 30/40

Bitumen Penetration Grade 30/40

General Description of Bitumen Penetration Grade 30/40

PUBLTD Bitumen Penetration Grade 30/40 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. Also This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Softening point and penetration of bitumen 30/40

Penetration grade bitumen supplied by PUBLTD is pure petroleum grade bitumen, manufacture from vacuum bottom by passing hot air. Also The bitumen supplied by PUBLTD produce from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 30/40 has penetration between 30~40 desi-millimeter and softening point between 55 ~ 63C. However, The penetration grade bitumen 30/40 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 30/40 has very strong viscosity compare to other grades.

Guaranty|warranty of Bitumen Penetration Grade 30/40

GJPco guaranty the quality of Bitumen Penetration Grade 30/40 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. JGPco guaranty the quality to meet with ASTM/EN 12591.

Specification of Bitumen Penetration Grade 30/40