Bitumen Penetration Grade 80/100

Iran bitumen 80/100

JGPco – bitumen penetration grade 80/100 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.Bitumen 80/100 is most used bitumen grade and basic material for all other bitumenious products.

Softening point and penetration of bitumen 80/100

Penetration grade bitumen supplied by GLB is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by GLB is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 80/100 has penetration between 80~100 desi-millimeter and softening point between 48 ~ 56C. The penetration grade bitumen 80/100 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 80/100 has very strong viscosity compare to other grades.

Guaranty/warranty of Bitumen Penetration Grade 80/100

JGPco guaranty the quality of Bitumen Penetration Grade 80/100 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. JGPco guaranty the quality to meet with ASTM/EN 12591.

Specification of Bitumen Penetration Grade 80/100

Bitumen 80/100

Specification

Test method

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

100/80

D-5

Softening point c

42/50

D-36

Ductility @25 c

100 min

D-113

Loss on heating(wt) %

0.2 Max

D-6

Drop in penetration after heating %

20 Max

D-6 D-5

Flash point c

230 min

D-92

Solubility is CS2(wt) %

99.5 Max

D-4

Spot test

0.8

A.A.S.H.O.T102

 

Bitumen Penetration Grade 80/100