Bitumen Penetration Grade 100/150

General description of bitumen 100/150

JGPco Bitumen Penetration Grade 100/150 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Softening point and penetration of bitumen 100/150

Penetration grade bitumen supplied by JGPco is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by JGPco is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 100/150 has penetration between 160~220 desi-millimeter and softening point between 39~ 47C. The penetration grade bitumen 100/150 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 100/150 has very strong viscosity compare to other grades.

Guaranty/warranty of bitumen 100/150

JGPco guaranty the quality of bitumen 100/150 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. JGPco guaranty the quality to meet with ASTM/EN 12591.

Specification of penetration bitumen 100/150

Bitumen 100/150

Specification

Test method

Specific gravity @ 25/25 cg

1.01/1.06

D-70

Penetration @ 25 c

100/150

D-5

Softening point c

39/47

D-36

Ductility @25 c

100 min

D-113

Loss on heating(wt) %

0.2 Max

D-6

Drop in penetration after heating %

5

D-6 D-5

Flash point c

230 min

D-92

Solubility is CS2(wt) %

99.0 Max

D-4

Spot test

0.8

A.A.S.H.O.T102

Bitumen Penetration Grade 100/150